I'm looking for two of the white bumper alignment clips that fit between the bumper and the rear quarter panel on the passenger side of a MKII ZS.
Anyone got any or can point me in the direction of the bumper alignment clips that fit between the bumper and the rear quarter panel on the passenger side of a MKII ZS superstore? (there seems to be every other type of shop in Livingston but the one you need)!
By how much do those who have gained by war fall short of the number of those who have perished in it? No doubt you will reply that there can be no comparison, that the dead cannot be numbered, while the living who have been rewarded may be summed up with three figures.
I have 4 used ones, but they don't have the steel clip!
I still have the steel clips from the old ones.
I had a ickle bump and the old clips got a bit....distorted .
The end of the clip that holds them onto the body panel has bust off, do you think if I got a hold of 2 of your used ones I'd be able to insert the steel clips from mine? If so, lets talk cash...
I'm confused...happens easily...why the need for the nuts and washers etc? The two 'bumper alignment thingys' don't appear to have any screws/washers or owt else...just a white plastic lump with a v shaped metal clip on one side that the bumper sits in and a protruding bit on the opposite side that sticks through the bodywork with no return catches, it's the no return catches that are broken on my existing clips. The only screw I see is the one that goes up through the arch part of the bumper into the arch of the car (btw the hole that this screw passes through before being attached to the car is busted) but I have a cunning plan for that! Are we talking about the same bit?
and the old clips got a bit....distorted 
. 
Linear Mode
