FTAO: Folks who have done ¼ mile with engine mods...

[arwilson80]

How accurate is this?

Power at Flywheel (BHP) : 175
Weight without Driver (KG) : 1285
Power to Weight Ratio (BHP Per Ton) : 138.37
0 - 60 (Secs) : 7.67
0 - 100 (Secs) : 20.96
60 - 100 (Secs) : 13.29
Quarter Mile (Secs) : 16.10
Terminal Speed (MPH) : 87.63
Drag Strip Quarter Mile (Secs) : 15.90
Drag Strip Terminal Speed (MPH) : 89.13


Will be interesting to see how it compares to what you folks have got.

[DeMoNPauL]

Heres the stats for a stock 180 taken from this site - http://www.letstorquebhp.com/default.asp

Power at Flywheel (BHP) : 175
Weight without Driver (KG) : 1235
Power to Weight Ratio (BHP Per Ton) : 143.98
0 - 60 (Secs) : 7.42
0 - 100 (Secs) : 20.04
60 - 100 (Secs) : 12.62
Quarter Mile (Secs) : 15.84
Terminal Speed (MPH) : 88.91
Drag Strip Quarter Mile (Secs) : 15.64
Drag Strip Terminal Speed (MPH) : 90.43

Many people have bettered the given times with a stock 180.

DJLawson on XPF RAN A 15.08 with just a cat back exhaust added to his car.

See more times here - http://forums.xpowerforums.com/showthread.php?t=28437

[DeMoNPauL]

If i remember correctly Using the OBD2 set up when we had the red 180 With induction and cat back we recorded a

0-60 in 6.67 secs
1/4 mile in 14.7

Theres quite a few on xpower who have achieved similar.

Lewerty has recorded a 0-60 of 5.9 with his cammed up 180.

Only way to truly test it is to go to a dragstrip.

[arwilson80]

Yeah. That's what i was looking. A comparison between those that had done the ¼ mile and then compare it with the figures that the site dumps out.